Intelligent Call Point with Isolator supplied with Glass
These call points are available with or without an integral isolator and are designed to provide a manual alarm interface to Notifier fire alarm control panels where additional protection against the environment is necessary. Installation efficiency, flexibility and compliance with the latest standards are at the heart of the call point range. The unique ‘plug and play’ concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link (P102) to provide loop continuity for testing. During the commissioning phase, the links are removed and the terminal block is simply inserted into the connector at the back of the unit. No retermination is required. Both break glass, supplied, and resettable operating elements (PS230) can be used in the standard unit. Operation of the resettable element, as well as being indicated by the units LED, is also indicated by a yellow strip on the element which becomes visible when activated. With the addition of a hinged transparent cover (PS200) the element may be protected against accidental operation and may be further protected by using an anti-tamper cover seal (P056) which requires breaking in order to operate the unit. The call point uses one of 99 possible addresses which is simply ‘dialed in’ using the two rotary decade switches on the rear of the unit.
| Weight | 0.88 lbs |
|---|---|
| Dimensions | 3.84 × 3.66 × 2.79 in |
| Brand | |
| Condition | New |
| Production Status | Active |
