Fireye BP110UV-S6


BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 6 timings (EP160), with UV non-self check amplifier, IP40

Availability: Please Call for Availability

Condition: New
Brand: Fireye
Status: Active
SKU: 179806
Manufacturer Part #: BP110UV-S6
Compatible with 60-2981-1 and Siemens LFL wiring base


The Fireye BurnerPRO is a compact, microprocessor-based, primary flame safeguard control system designed to provide the proper burner sequencing, ignition, and continuous flame monitoring for on-off, multi-stage, or modulating burners used in commercial heating and process equipment firing oil and gas fuels. The system is designed for use in non-permanent operations that require burner recycle at least once every 24 hours.

Flame monitoring for the UV version is accomplished by the built-in amplifier and compatible UV scanner. Control functions and timings are factory-set via unique microcontroller firmware. Through seven SMART LEDs, the control provides current operating status and lockout information in the event of a safety shutdown. Refer to the BurnerPRO ordering information section later in this document for the various combinations of control functions and timings.

A complete BurnerPRO system includes the BP110/230, flame scanner, and wiring base. The BurnerPRO performs a safety self-test on every start. If a flame is detected prior to a start or during the purge cycle, the fuel valves are not energized and the control locks out. The LEDs and alarm terminal are used to annunciate the presence of a lockout condition.

Additional information

Weight 2.5 lbs
Dimensions 4.15 × 4.15 × 5.00 in





Unit of Measurement

EA (Each)

Production Status



  • Non-volatile lockout capability
  • Proof of fuel valve closure
  • Air-flow proving
  • A run/check feature allows the operator to stop the program sequence in different positions (Purge, Ignition, PTFI and MTFI)
  • Remote and local Reset
  • One second flame failure response time
  • Smart LEDs provide on board diagnostic lockout information
  • Real-time internal diagnostics for added safety integrity
  • Extended temperature operation (-40°C to 60°C) with an over-temp inhibit feature
  • High capacity relay contacts


There are no reviews yet.

Be the first to review “Fireye BP110UV-S6”



Fireye - Manual